ZAMAC NAIL-INS

The Zamac Nail-in is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick, or stone. 

Installation
¼” Nail-ins are used with ¼” drill bits, which should be drilled into the base material at least ¼” deeper than the required embedment.

Finishes

• Stainless Steel
• Galvanized (Carbon)

Sizes

• 1/4” x 1”
• 1/4” x 1-1/4”
• 1/4” x 1-1/2”
• 1/4” x 2”
• 1/4” x 3”
• 1/4” x 4”